Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Rear bumper

In this guide, we will discover the main instructions on how to remove and replace the rear bumper of the Volkswagen New Beetle. First, open the boot lid and start unscrewing the fixing screws located inside the wheel arch using a T30 Torx key; then remove the rear lights by disconnecting the electrical connector of the bulbs. At this point, unscrew all the fixing screws of the bumper, prying at the sides to detach and remove it; carry out the repair or replace it with a new one, securing it properly and refitting all other components.

Posted on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on a VW New Beetle
Removing the Rear Bumper on a VW New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) Is the rear bumper of your Beetle due for replacement? Unsure how to remove it? Start by lifting the rear hatch, then unscrew the retaining screws lo…
Removing the Front Bumper of the Volkswagen New Beetle
Removing the Front Bumper of the Volkswagen New Beetle
Volkswagen New Beetle (1998-2005 / ) This guide outlines the main steps to remove and replace the front bumper of the Volkswagen New Beetle. First, open the bonnet and start by removing …
How to Remove the Front Bumper on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In this video, we will see how to proceed with the removal of the bumper on a Volkswagen New Beetle. Lift the bonnet and secure it. Using a battery-p…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos