Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Crafter?

Model: Volkswagen Crafter 2E, 2F, MK 1 - Years 2006-2017
Part: Service warning light

You can reset the Service light displayed on the Volkswagen Crafter by turning on the instrument cluster by inserting the appropriate key into the ignition switch: once the cluster is on, press and hold the button located to the left of the instrument cluster until the wrench icon and the remaining kilometres until the next maintenance appear. When this screen is displayed, continue to hold the button for a few seconds until a confirmation message appears. At this point, you can turn off the cluster to verify the reset.

Posted on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Volkswagen Crafter?
How to Reset the Service Light on the Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2E, 2F, MK 1) You can completely clear the Service light from the instrument cluster of the Volkswagen Crafter by turning on the ignition and inserting the appropr…
How to Reset the Service Light on Volkswagen Crafter?
How to Reset the Service Light on Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2E, 2F, MK 1) You can completely clear the Service light that illuminates on the dashboard of the Volkswagen Crafter by turning on the ignition with the appropriat…
Resetting the Service and Maintenance Light on the Volkswagen Crafter
Resetting the Service and Maintenance Light on the Volkswagen Crafter
Volkswagen Crafter (2006-2017 / 2E, 2F, MK 1) In this guide, you will find instructions to reset the service and routine maintenance light on the Volkswagen Crafter. First, get inside the cabin a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos