Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a 2012 Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In today's video, we will see how to reset the service light on a Volkswagen Polo, specifically the model registered in 2012. This operation is very simple and can be done independently in just a few seconds after performing the regular engine oil change and replacing the filter.

First, press and hold the "0.0/SET" button on the speedometer, then turn on the vehicle's ignition without starting the engine.

Next, release the button and press the left button on the speedometer to execute the reset and complete the task as shown in the video.


Posted on 25 June 2026 by ScegliAuto


Related tutorials

How to reset the service light of the 2004 Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) If you don't know how to correctly and safely perform the manual reset of the service indicator light on your Volkswagen Polo (year 2004), don't worr…
How to reset the service light on the 2016 Volkswagen Polo
How to reset the service light on the 2016 Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To complete the procedure to reset the service light of your Volkswagen Polo (2016), you only need a few seconds. Let's find out together the steps y…
Service Reset on a Volkswagen Polo
Service Reset on a Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) This brief tutorial shows how to perform a service reset on a Volkswagen Polo produced from 2023 to 2025. Start the operation by turning on the ignit…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos