Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Conditioning Fan Resistor in a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

To replace the air conditioning fan resistor in a Volkswagen Golf 6, turn off the engine and disconnect the battery. Remove the panel under the passenger side dashboard to access the fan compartment. Disconnect the electrical connector from the resistor and unscrew the screws that secure it to the fan housing. Carefully extract the faulty resistor and insert the new one, ensuring it is properly seated. Secure the screws and reconnect the electrical connector. Reassemble the panel and reconnect the battery. Start the engine and check the fan operation at all speeds to ensure the replacement is correct.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Remove the fan resistor from a Golf? Here’s how to take it out from inside the cabin. Use a lever to remove the plastics under the dashboard where th…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today we will discover the process of disassembling and replacing the resistor of the cabin fan of the Volkswagen Golf. First, we get on board the ve…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Here’s how to remove the heater resistor on a Volkswagen Golf 5. Use a lever to remove the plastic cover under the glove compartment on the right, th…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos