Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuses in a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Fuse box

How to replace the fuses in a Volkswagen Golf? Open the cover and check the dashboard warning lights to identify the issue; use a plastic lever to remove the drawer located in the dashboard (right side). Access the fuse box and pull out the damaged fuses using needle-nose pliers. Once this is done, insert the new fuses into their designated slots. Finally, close the fuse inspection box with the glove compartment. Test the proper functioning of the vehicle by turning on the ignition with the appropriate key.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) If you are wondering where the fuse box of your Volkswagen Golf Mk6 is located, read the following instructions carefully and then put them into prac…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The fuse box of a Volkswagen Golf is located in the engine compartment. To access it, open the front hood of the car and locate the fuse box, usually…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The fuses in the Volkswagen Golf 5 are divided between two fuse boxes installed in the vehicle: the first fuse box is located inside the cabin, on th…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - Where are the cigarette lighter fuses located in the Volkswagen Golf IV? Read answer
    • Golf 2012-2019 - Where is the Volkswagen Golf 7 Start & Stop fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - What is the Volkswagen Golf Mk5 wiper fuse? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer
    • Golf 2003-2008 - Where is the VW Golf 5 radiator fan fuse located? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos