Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Heater Radiator on a VW Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Heater core

See other generations:
Video tutorial

Replace the heater radiator on a Volkswagen Golf 5. Remove the plastic covering of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws and remove the plastic cover over the heater radiator.

Once all the described operations are completed, proceed to the engine bay. Remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes in the cabin.

Work in reverse for reassembly.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Cabin Heater Radiator in a Volkswagen Golf
Removal and Replacement of the Cabin Heater Radiator in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below, we will discover how to remove and replace the cabin heater radiator in a Volkswagen Golf. First, open the bonnet and start disconnecting the …
Replacing the Heating Radiator of the Volkswagen Golf 4
Replacing the Heating Radiator of the Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, you will see the procedure to remove and replace the cabin heating radiator of the fourth series Volkswagen Golf. First, get inside th…
Replacing the Heating Radiator on a Volkswagen Golf
Replacing the Heating Radiator on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To access the car's climate radiator, follow the instructions below and also refer to the video tutorial (this is quite a complex job). First, remove…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos