Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heater Fan on a VW Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Blower motor

See other generations:
Video tutorial

How to replace the heater fan on a VW Golf 5. In this video, see how to carry out the disassembly. Use a lever to remove the plastic under the front dashboard, then unscrew the cover (where the fan is located) with a screwdriver.

Disconnect the large connector for the fan power supply, then remove it from the cabin. Insert a new fan (connect the power supply connector).

Finally, reassemble the cover and tighten the screws. Check the correct installation of the previously installed parts and test their proper functioning.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to replace the heater radiator in the Volkswagen Golf?
How to replace the heater radiator in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the cabin heater radiator in the Volkswagen Golf, remove the glove compartment located on the passenger side and the side cover of the cor…
How to Remove the Cabin Fan on Volkswagen Golf 5
How to Remove the Cabin Fan on Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This video provides the main instructions on how to remove the cabin heating fan from a fifth-generation Volkswagen Golf. First, get inside the vehic…
How to Replace the Heater Radiator in a Volkswagen Golf 7?
How to Replace the Heater Radiator in a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The procedure for replacing the cabin heater radiator in the Volkswagen Golf requires completely removing the dashboard to access the components insi…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos