Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Fuses on Volkswagen Polo

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Fuse box

Replace the damaged fuses inside the engine compartment; here’s how to change them. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Open the plastic cover above the battery, and remove it from the fuse box. Once the box is exposed, replace the damaged fuses with new ones (use suitable pliers to pull out the fuses). After maintenance, refit the fuse box cover and close the front bonnet. Test the vehicle.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The attached video shows the fuse diagram for a Volkswagen Polo. To access the fuses, open the front door. Next, unclip and remove the side cover of …
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The Volkswagen Polo 6R has two different fuse boxes: the main and the secondary. As you might expect, they are located in two different places within…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before carrying out any maintenance or replacement of fuses in your Volkswagen Polo, ensure that the car is completely off and preferably with the ba…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - What is the location of the power steering fuse on the Volkswagen Polo? Read answer
    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos