|
Do it yourself
| |||
| ||||
How to Drain and Replace DSG Transmission Fluid
Model: Volkswagen Jetta
MK 5, A5
- Years 2005-2010
This tutorial explains the procedure for changing the transmission fluid on a Volkswagen Jetta. First, remove the engine cover using a ratchet. Now remove the splash guard, the battery, and the air filter box. Using a ratchet with an extension, unscrew the bolts securing the shield and remove it. You will then have access to the filter plug, which you can unscrew using a 24mm socket with an extension. Remove the plug with the attached filter and begin to siphon the stagnant fluid from the well. Retrieve the old gasket from the filter plug, insert a new filter into the well, and re-screw the plug. Using a 14mm Allen key, unscrew the sump plug located under the vehicle and drain the old fluid. Re-screw the plug and proceed with replacing it with new fluid. The sump holds approximately 4.5 litres of oil. Shake the fluid before inserting it. You can speed up the operation by using air pressure inserted into the fluid container via a compressor.
Updated on 5 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Jetta
(2010-2018 /
MK 6, A6)
Top up the coolant on your VW Jetta. Start by pulling the plastic lever located at the bottom left of the dashboard, lift the front bonnet and secure…
Volkswagen Jetta
(1998-2005 /
A4, MK 4)
Below are the instructions on how to bleed and top up the coolant in the Volkswagen Jetta, as well as the Golf and Bora. First, raise the vehicle and…
Volkswagen Jetta
(2005-2010 /
MK 5, A5)
Today, you will see in this video tutorial how to remove and replace the coolant reservoir on the Volkswagen Jetta. First, open the bonnet and start …
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.246
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |