Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Central Tunnel Trim from a Volkswagen Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Center console tunnel

See other generations:
Video tutorial

Today, you will learn how to remove the central tunnel trim from a seventh-generation Volkswagen Golf by following these simple and quick steps. First, get inside the car and start by removing the plastic frame around the climate control switches; then, unscrew the screws located underneath using a screwdriver.

Next, pry off the plastics near the gear lever to remove them and unscrew any additional screws found underneath; finally, gently detach the central tunnel trim, removing it as shown in the video!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Removing the Centre Console of a Volkswagen Golf Mk4
Removing the Centre Console of a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's tutorial, you will learn how to remove the centre console of a fourth-generation Volkswagen Golf. First, get inside the vehicle and remove…
How to Replace the Rear Air Vents on the Volkswagen Golf
How to Replace the Rear Air Vents on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below are the instructions to remove and replace the rear air vents of the centre tunnel on the Volkswagen Golf. First, get inside the cabin and star…
How to Remove the Armrest of a Volkswagen Golf
How to Remove the Armrest of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, see how to remove the armrest of the centre tunnel cover of a Volkswagen Golf. Position the armrest vertically, then use a socket wren…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos