Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Rear Seat in Polo

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Seat

See other generations:
Video tutorial

Do you want to create space in your Polo? Here’s how to fold down the rear seat. Grip the seat base and slide it out from under the backrest.

Remove the headrests and pull the lever located on the backrest of the seat, then fold the backrest forward: let it rest on the seat base. Repeat these steps for the other rear seats in the car. If you want to fold down the front seat for additional space: press the lever next to the seat or rotate the knob until it is fully folded.

After folding the seats, use the space as you wish.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Volkswagen Polo?
How to Replace the Fuel Pump on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the fuel pump on a Volkswagen Polo, first loosen the screws securing the rear seat bench to its housing. Once removed, you can locate the …
Replacing the Timing Belt on a Volkswagen Polo 1.4
Replacing the Timing Belt on a Volkswagen Polo 1.4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide outlines the main steps to remove and replace the timing belt on a Volkswagen Polo with a 1.4 petrol engine. First, lift the vehicle and r…
How to Replace the Timing Belt on a Volkswagen Polo 1.4
How to Replace the Timing Belt on a Volkswagen Polo 1.4
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The following steps will show how to remove and replace the timing belt on a petrol Volkswagen Polo 1.4. First, open the bonnet and begin by removing…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos