Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volkswagen Polo 1.4

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

The following steps will show how to remove and replace the timing belt on a petrol Volkswagen Polo 1.4. First, open the bonnet and begin by removing the engine mount. Then, lift the vehicle and remove the front right wheel and the wheel arch liner, as shown in the video.

Next, disconnect the V-belt and remove the crankshaft pulley; take off the timing cover to access the belt, noting any necessary references for replacement. Install the new timing belt and replace the water pump kit if necessary.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

When and How to Replace the Timing Belt on the Volkswagen Polo 1.4 MPI
When and How to Replace the Timing Belt on the Volkswagen Polo 1.4 MPI
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, you will find the main instructions for removing and replacing the timing belt on the Volkswagen Polo 1.4 MPI; for this type of engine…
Guide to Replacing the Timing Belt on a Volkswagen Polo 1.2
Guide to Replacing the Timing Belt on a Volkswagen Polo 1.2
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide provides the necessary instructions on how and when to replace the timing belt on a Volkswagen Polo 1.2 3-cylinder engine. For this type o…
Replacing the Timing Belt on a Volkswagen Polo 1.4
Replacing the Timing Belt on a Volkswagen Polo 1.4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide outlines the main steps to remove and replace the timing belt on a Volkswagen Polo with a 1.4 petrol engine. First, lift the vehicle and r…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How much does it cost to replace the timing chain of the Volkswagen Polo 1.2 petrol? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos