Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Adhesive Badges from the Rear Bonnet

Model: Volkswagen Scirocco MK 3 - Years 2008-2017
Part: Body

To remove the badges indicating the model of the vehicle from the rear bonnet, take care not to scratch the bodywork. Since the individual letters are applied with double-sided adhesive, it is recommended to warm them slightly with a hairdryer and then peel them off using a thin nylon wire. Once the letters are removed, it is likely that some adhesive residue will remain on the bodywork: remove it by rubbing with your fingers and finally clean any glue marks with alcohol. If you have some wax available, it may be useful to finish and polish the area in question.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radio on a Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) Insert a plastic lever into the gap around the radio frame and gently pry it out, gradually removing it until the entire frame is detached. Now, unsc…
Removing the Manufacturer's Badge
Volkswagen Scirocco (2008-2017 / MK 3) To easily remove the badge (which is glued with double-sided tape), it is recommended to heat it with a hairdryer to loosen the adhesive grip; once h…
Guide to Removing the Door Panel
Guide to Removing the Door Panel
Volkswagen Scirocco (2008-2017 / MK 3) The video guides you through removing the door panel of your vehicle to replace the factory speakers. First, remove the plastic parts of the door to …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos