|
Do it yourself
| |||
| ||||
Replacing Automatic Gearbox Oil
Model: Volkswagen Golf
Golf 5, MK 5, Golf V
- Years:
2003, 2004, 2005, 2006, 2007, 2008
Video tutorial
This maintenance operation should ideally be carried out by qualified personnel equipped with the appropriate equipment for washing the automatic gearbox, ensuring that all the old oil is expelled from the transmission. It is also advisable to add a specific washing additive to the gearbox before replacing the oil: add the additive and run the engine for a while. Then, remove the battery and its support, unscrew the filter cap of the gearbox, and extract the filter. Connect the hoses of the equipment that will automatically insert the new oil while completely eliminating the old; also add the additive and finally replace the filter and the corresponding O-ring of the cap. Check the level from the breather plug located under the gearbox. Take the vehicle for a drive. You will notice a smoother engagement of the gears. Check the oil level again when hot.
Updated on 6 February 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
In this video tutorial, you will learn how to perform general maintenance on the DSG automatic gearbox of a Volkswagen Golf. First, open the bonnet a…
Volkswagen Golf
(2008-2012 /
Golf 6, MK 6, 5K1, Golf VI)
First, remove the battery and the support base to access the oil filter of the gearbox: it is a cartridge filter. Next, locate the oil drain plug of …
Volkswagen Golf
(2008-2012 /
Golf 6, MK 6, 5K1, Golf VI)
This guide outlines the steps to change the manual gearbox oil on a Volkswagen Golf. First, lift the vehicle and begin by removing the plastic engine…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 1.753
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |