Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat Cable on a Volkswagen Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the seat cable from a fourth-generation Volkswagen Golf, specifically the R32 version. First, disconnect the two battery terminals: open the front bonnet and disconnect the electrical connectors located underneath.

Next, remove the plastic clip holding the seat cable and slide out the pin from the cable mechanism, as shown in the video. At this point, unscrew all the seat fixing screws to lift it out. Finally, completely remove the seat cable, as illustrated in the video!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Removing the Front Seat from a Volkswagen Golf Mk5
Removing the Front Seat from a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see how to remove the front seat from a fifth-generation Volkswagen Golf by following these simple steps. First, disconnect the vehicl…
How to Remove the Front Seat of a Volkswagen Golf
How to Remove the Front Seat of a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Before you can start, open the front door of your Volkswagen Golf. Begin by unscrewing and removing the Torx bolts that secure the seat rails to the …
How to Remove the Front Seat of a Volkswagen Golf
How to Remove the Front Seat of a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Before starting, open the front door of your Volkswagen Golf. Begin by sliding the seat back on its rails, then unscrew the front Torx screws. Next, …

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos