Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gear Shift Controls on the Steering Wheel

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Accessory kit

See other generations:
Video tutorial

The first task is to detach the airbag: using a mirror makes it easier to access the securing springs, which can then be released by levering with a small flathead screwdriver. Next, remove the screws securing the switch panels on the steering wheel and disconnect the corresponding plug.

Now, pull out the connector that secures the gear shift panel to the electronic circuit to separate them (be careful with the spring). Then, attach the spring to the new gear shift lever, connect the circuit, and insert the connector.

Refit the controls onto the steering wheel and reconnect the airbag.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Removing the Gear Shift Gaiter and Knob on a Volkswagen Golf
Removing the Gear Shift Gaiter and Knob on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In today's tutorial video, you will see how to remove the gear shift gaiter along with the knob of a seventh-generation Volkswagen Golf. First, get i…
How to replace the plastic cover of the steering wheel controls of the Volkswagen Golf
How to replace the plastic cover of the steering wheel controls of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's instructions will allow us to disassemble and replace the plastic cover of the steering wheel controls of the Volkswagen Golf, in simple and …
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To remove the gear shift gaiter on a Volkswagen Golf, sit inside the car and look towards the centre console where the gear lever is located. Careful…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos