Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Remove the cover panel of the Golf 6 if you want to replace it or work inside the door. Pry at the internal handle: remove the entire trim from above the panel.

Unscrew the torx screws located inside the internal door handle across the entire surface. Release all the clips by prying around the perimeter of the door panel, then pull it away using your hands.

Disconnect the opening lever cable, the window regulator connectors, and the speaker connectors. Work inside the door, then refit the cover panel by reversing the disassembly steps.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Let's look at removing the door panel of a Golf 6. Disconnect the battery terminals in the engine bay, then remove the cover of the internal handle o…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Replacing the damaged right panel on your Golf 4? Here’s how to remove it from the right front door. Remove the courtesy light (if present on your ve…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Learn how to remove the cover panel of the door on a Golf 7. Remove the cover panel for replacement or maintenance inside. Disconnect the battery ter…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos