|
Do it yourself
| |||
| ||||
Front Wheel Bearing Replacement
Model: Volkswagen Golf
MK 5, Golf 5, Golf V
- Years 2003-2008
To replace the front hub bearing, it is necessary to disassemble the hub itself to position it under a hydraulic press, allowing for the removal and insertion of the bearing. Lift the vehicle on a lift (or on suitable axle stands) and remove the wheel, then proceed to disassemble the brake caliper, its support, the disc, the protective shield, the track rod ends (the one for the wishbone and the one for the steering rack), the central nut securing the driveshaft, and the bolts securing the shock absorber. Once the hub is removed, extract the ABS sensor and proceed to remove the bearing races (the one attached to the sensor and the one still inserted in the hub): it may be effective to score it radially to create the right play for extraction, which should be completed under the press with the appropriate pad. Next, insert the new bearing, also under the press, and secure the ABS sensor. Refit the hub onto the vehicle, proceeding in reverse.
Updated on 6 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
To replace the front wheel bearing on the Volkswagen Golf 6, you need to remove the wheel corresponding to the bearing being replaced by unscrewing i…
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
Below we will see the step-by-step instructions that will allow us to disassemble and replace the front wheel bearing of the Volkswagen Golf. First o…
Volkswagen Golf
(1983-1992 /
MK 2, Golf 2)
To replace the front wheel bearing on the Volkswagen Golf, lift the car and loosen all the bolts securing the wheel. After removing the wheel, loosen…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.301
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |