Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Lift the window switch panel and disconnect its connectors, then remove the two screws now exposed. As shown in the video, unscrew all the screws securing the panel from underneath and the sides.

Done! At this point, you can remove the panel by pulling it by hand in every part and disconnecting the rear cables. Having reached this point, you can also replace the speakers if you wish, or proceed in reverse and reassemble the new panel.

Connect the connectors, fit it back in place, screw in all the fixing screws, and install the window switch panel. A fairly simple and quick operation.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) Remove the door panel of a Volkswagen Golf (driver's side). Before starting the disassembly, disconnect the battery terminals located in the engine b…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Let's remove the door panel of a Volkswagen Golf 4 (driver's side), and see how to proceed. Before starting the disassembly, disconnect the battery t…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Perform the removal of the right front door panel of a Volkswagen Golf Mk5. Disconnect the battery terminals in the engine bay. Use a screwdriver to …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos