Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Steering Wheel Airbag on Volkswagen Cars

Model: Volkswagen Volkswagen Various
Part: Airbag

For safety reasons, before proceeding with the removal of the airbag, disconnect the battery. First, lift the bonnet, place the support rod, and disconnect the negative terminal followed by the positive terminal. Now, using a plastic wedge, remove the plastic cover behind the steering wheel, as shown in the video. Once done, turn the steering wheel 90 degrees to the left to expose the rear hole. Inside this hole, insert a small flat screwdriver and push the lever located inside that holds the airbag in place. This can now be extracted: disconnect the wires and you're done.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the airbag on Volkswagen group cars
How to deactivate the airbag on Volkswagen group cars
Volkswagen Volkswagen Various On models from the Volkswagen group, including Audi and Seat, the procedure to deactivate the passenger airbag is the same. The passenger airbag shou…
How to Replace the Steering Angle Sensor on Volkswagen Vehicles?
How to Replace the Steering Angle Sensor on Volkswagen Vehicles?
Volkswagen Volkswagen Various To replace the steering angle sensor on Volkswagen vehicles, loosen the screws that secure the airbag at the centre of the steering wheel, located at…
How to Deactivate the Passenger Airbag on a Volkswagen
How to Deactivate the Passenger Airbag on a Volkswagen
Volkswagen Volkswagen Various If you need to deactivate the passenger airbag in your car to install a child seat on the passenger seat, it is essential to do so. First, access the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos