Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Removing the rear door lock module on Volkswagen Polo 9N

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK IV, Polo IV, 9N, MK 4 - Years 2001-2009
Part: Lock
Operation: Removing the rear door lock module on Volkswagen Polo 9N

Let's see in this short video how to remove the rear door lock module on a Volkswagen Polo 9N, from 2003. First we open the rear door and start with the disassembly of the door panel, unscrewing all the fixing screws; after which we remove the window handle and disconnect the cable of the opening handle. At this point we remove the internal lining and unscrew the fixing screws of the electronic lock, disconnecting the electrical connector; then replace the whole module and reassemble everything, following the video to the end!


Posted on 6 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - Why doesn't the trunk of the Polo 6r open? Read Answer
    • Polo 2017-2025 - How to unlock the rear door on Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to disable automatic locking in the Volkswagen Polo? Read Answer
    • Polo 2017-2025 - How to open the door of the Volkswagen Polo with the mechanical key? Read Answer
    • Polo 2001-2009 - How do I remove the locked rear door lock on the Volkswagen Polo 9n? Read Answer
    • Polo 2009-2017 - Why doesn't the left rear door of a Volkswagen Polo open? Read Answer
    • Polo 2009-2017 - Why did the lock on my Volkswagen Polo get stuck? Read Answer
    • Polo 2001-2009 - How to open a door locked by the electronic lock on Volkswagen Polo? Read Answer
    • Polo 2009-2017 - Where is the lock located in the Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos