Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Double Din Aftermarket Sat Nav

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

Release the frame around the car radio by prying along the edges and unscrew the four mounting screws located at the four corners; then extract the car radio from its location by pulling it forward and disconnecting the relevant plugs; connect the adaptor wiring to the original plugs and then connect the new car radio, taking care not to pinch the cables as you insert it back into its location.

Tighten the four mounting screws and apply the frame.

Turn on the car radio and enter the settings menu to perform the setup.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Installation of Aftermarket Double DIN Car Radio
Installation of Aftermarket Double DIN Car Radio
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Use a plastic lever to remove the trim around the original car radio; then unscrew the mounting screws at the four corners and pull the car radio for…
How to Install the Navigator on the VW Golf
How to Install the Navigator on the VW Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) If you want to replace the original radio with an aftermarket entertainment and navigation system, there are many plug-and-play solutions available t…
Bluetooth Accessory Kit Installation
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Using a plastic tool to avoid damaging the bodywork, lever the air vent above the sat-nav to release the plastic clips and remove it to access the co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos