|
Do it yourself
| |||
| ||||
Bluetooth Accessory Kit Installation
Model: Volkswagen Golf
Golf 6, MK 6, 5K1, Golf VI
- Years:
2008, 2009, 2010, 2011, 2012
This video is currently unavailable
Using a plastic tool to avoid damaging the bodywork, lever the air vent above the sat-nav to release the plastic clips and remove it to access the console retaining screws. Use the same procedure on the airbag panel on the side. Remove the plastic frame around the sat-nav by prising at the edges. Unscrew the console retaining screws and completely remove it. Disconnect the necessary electrical connectors to install the kit. Prepare the cables supplied with the Bluetooth kit, which need to be inserted into the original connectors, with the other ends connected to the kit's control unit. Wire the kit according to the attached instructions and secure it inside the dashboard. Refit the cover, passing the cables through the radio tunnel. Refit the sat-nav by reversing the previous steps. Turn on the sat-nav and check the perfect operation of all the new features offered.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
When it comes to personalising your car, nothing is easier than rubber/aluminium pedals. They are an accessory that significantly changes your drivin…
Volkswagen Golf
(2008-2012 /
Golf 6, MK 6, 5K1, Golf VI)
Having more space to store items inside the vehicle is always very useful. To add new space, you need to obtain the storage compartment kit to be ins…
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
This video illustrates how, in a few simple steps, you can set up track playback on your standard car radio from an external Bluetooth source. In thi…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
