Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Slave Cylinder from a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

Before starting, open the bonnet of your Volkswagen Golf. Begin by disconnecting the relevant hose. Then, enter the cabin and unscrew the lower bolts that secure the base of the clutch pedal.

Once done, unscrew and remove the nut that secures the pedal pin, then remove the pedal itself. At this point, unscrew the bolts that secure the clutch slave cylinder.

Once you have completed this step, you can extract and remove the cylinder itself, and you will have finished the disassembly.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cylinder on a Volkswagen Golf?
How to Replace the Clutch Cylinder on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the clutch cylinder on a Volkswagen Golf, open the bonnet to access the rear of the engine bay. Here, locate the screws securing the clutc…
How to replace the clutch cylinder on the Volkswagen Golf?
How to replace the clutch cylinder on the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the clutch cylinder on the Volkswagen Golf, open the bonnet to access the rear of the engine compartment: here you will find the bolts sec…
How to Replace the Clutch Master Cylinder on a Volkswagen Golf Plus
How to Replace the Clutch Master Cylinder on a Volkswagen Golf Plus
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will learn how to remove and replace the clutch master cylinder on a Volkswagen Golf Plus, following the instructions bel…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos