Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : Disassembly of the center tunnel on the Volkswagen Passat B5

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Central tunnel
Operation: Disassembly of the center tunnel on the Volkswagen Passat B5

Let's see in this short video how to remove the central tunnel on the Volkswagen Passat B5, first series, following the instructions below. First we get on board the car and start by removing the plastic covers that we find on the compartments of the central tunnel; then let's unscrew all the fixing screws that we find below, as shown in the video. At this point we unscrew the screws that we find on the sides, using a socket wrench, and then unhook the gearshift gaiter; we just have to lift and remove the central tunnel from the car!


Posted on 26 February 2024 by ScegliAuto



How to remove the dashboard under the radio from the Passat
Volkswagen Passat (2005-2010 / 3C, B6) How to remove the dashboard underneath on a Volkswagen Passat? Let's see how to proceed. Remove the trim frame under the stereo with a plastic lever
Replace the gear knob on your Volkswagen Passat
Volkswagen Passat (2005-2010 / 3C, B6) Do you want to replace the gear knob on your Volkswagen Passat? Let's see how to do it in this video: disconnect the frame of the leather cap with a
Where is the electronic parking brake control unit located in the Volkswagen Passat?
Volkswagen Passat (2005-2010 / 3C, B6) In this video, we can see where the electronic parking brake control unit of the Volkswagen Passat is located, useful in case it is broken and we nee

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos