Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Filter on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Diesel fuel filter

This guide shows how to replace the fuel filter on a Volkswagen Tiguan. The first step is to secure the vehicle and open the bonnet. The fuel filter can be easily accessed from the engine compartment without needing to lift the car. Once you locate the fuel filter housing, positioned behind the right front headlight, proceed with the dismantling. Using a Torx T20 spanner and a flat screwdriver, remove the screws from the cap; disconnect the lines leading to the filter from their respective clips. Lift the cap of the tank compartment with the screwdriver. At this point, detach the old filter, let it drain, and install the new filter with the corresponding new seal. Close the compartment and run the engine for a few minutes to allow the new filter to saturate.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Tiguan (2007-2016 / 5N, MK 1) To replace the diesel filter on the Volkswagen Tiguan 2.0 TDI, follow this procedure: first, open the bonnet. Once opened and secured, unscrew the 5 …
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The instructions provided in this guide will allow us to disassemble and replace the alternator of the Volkswagen Tiguan 2.0 TDI. First, let's open t…
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Below are all the instructions on how to disassemble and replace the timing belt of the Volkswagen Tiguan 2.0 TDI. First, open the bonnet of the vehi…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos