Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump on the Volkswagen Golf 1.4 TSI?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Pump

To replace the water pump on the Volkswagen Golf 1.4 TSI, open the bonnet to access the engine bay. Next, remove the upper engine cover and some hoses and obstructing parts to access the side of the engine where the pump is located. To extract it, you will need to remove the front right wheel and the cover of the corresponding wheel arch. By removing the securing bolts, the pump can be taken out of its housing and replaced with a new spare part. After replacement, reinstall all previously removed components.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
Replacing the Water Pump on Volkswagen Golf 1.4 TSI
Replacing the Water Pump on Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's guide will illustrate the main steps on how to remove and replace the water pump on the Volkswagen Golf 1.4 TSI. First, open the vehicle's bo…
Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.4 TSI
Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the main instructions for removing and replacing the water pump and timing belt on the Volkswagen Golf 1.4 TSI. First, open the bonnet of y…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos