Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlamp bulb on the Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on the Volkswagen Polo, open the bonnet to access the engine bay. Disconnect the connector at the rear of the headlamp and loosen the screws at the top. This will allow the headlamp unit to be removed from its housing, and you can then take off the protective cap from its inner part.

This will enable you to pull out the old bulb and replace it with a new spare part.

Once the new bulb is inserted, close the headlamp with the cover and reinstall it in its housing.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Volkswagen Polo?
How to Replace the Front Headlight Bulb of a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Good morning! Today, replace the front headlight bulb of your Volkswagen Polo. Start by opening the front bonnet. Next, unscrew and remove the rear c…
How to Replace the Front Headlamp Bulb on the Volkswagen Polo 5
How to Replace the Front Headlamp Bulb on the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this guide, you will learn how to correctly replace the front headlamp bulb on your Volkswagen Polo Mk5. First, lift the bonnet of the car and sec…
How to Replace the Front Headlamp Bulb on a Volkswagen Polo?
How to Replace the Front Headlamp Bulb on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the front headlamp bulb on a Volkswagen Polo, open the bonnet and access the rear of the headlamp where the circular protective cover is l…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos