|
Do it yourself
| |||
| ||||
How to Remove the Boot Lid on a Volkswagen Golf
Model: Volkswagen Golf
MK 3, Golf III, Golf 3
- Years:
1991, 1992, 1993, 1994, 1995, 1996, 1997
Video tutorial
Before you can start, you need to open the boot. Begin by lifting the side covers of the internal boot, exposing the wiring. Proceed to disconnect the connector attached to the green cable that goes upwards, and repeat this step for the opposite side. Once done, pull these wires from inside the pillars, bringing them out from the top. Next, unscrew the bolts that secure the hinges to the roof, located under the interior headlining of the car. At this point, remove the clips from the hydraulic struts while holding the boot lid up. Once the clips are removed and the struts are detached, you can remove the boot lid, successfully completing the disassembly.
Updated on 29 April 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2008-2012 /
Golf 6, MK 6, 5K1, Golf VI)
How to remove the rear light on a Volkswagen Golf Mk6? Follow these steps for disassembly: first, open the boot and use a lever to remove the plastic…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
In today’s tutorial, we will see how to remove the lock and handle of the boot on a fourth-generation Volkswagen Golf. First, open the boot and remov…
Volkswagen Golf
(2008-2012 /
Golf 6, MK 6, 5K1, Golf VI)
Before you can start, sit in the driver's seat of your Volkswagen Golf. Begin by releasing the clips that secure the airbag, located on the back of t…
Other guides you may be interested in |
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |