Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Number Plates from a Volkswagen Passat?

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Checks and maintenance

To remove the number plates from a Volkswagen Passat, lift the plastic caps located on the left and right sides of the plate. This will allow you to loosen the screws underneath and detach the plate by releasing its retaining clips: use a screwdriver to lever them off. Once the old plate is removed, position the new one, securing it with its clips, and screw in the screws on the sides. Repeat the same process for the other plate of the car.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Bonnet Strut on a Volkswagen Passat
How to Remove the Bonnet Strut on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before starting, open the bonnet of your Volkswagen Passat. Begin by unfastening and removing the two clips that secure the strut to the bonnet and t…
How to Dismantle the Front Brake Pads of a Volkswagen Passat
How to Dismantle the Front Brake Pads of a Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Before starting, lift the front end of your Volkswagen Passat. Begin by removing the front wheel by unscrewing the fixing bolts. Next, unscrew and re…
Where is and how to reach the fuse box of a Volkswagen Passat?
Where is and how to reach the fuse box of a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) Good morning! Today we will focus on locating and reaching the fuse box of our Volkswagen Passat. Let's start by opening the door on the right side o…

    Frequently Asked Questions

    • Passat 2005-2010 - How to unlock the Volkswagen Passat's lock? Read answer
    • Passat 2005-2010 - Why doesn't the Volkswagen Passat start up? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos