Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Driveshaft of a Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Axle shaft

See other generations:
Video tutorial

In this video tutorial, see how to remove and replace the front driveshaft of a sixth series Volkswagen Golf, following the instructions below. First, lift the vehicle and remove the front wheel; then undo the central bolt of the wheel bearing.

At this point, undo all the fastening pins of the driveshaft, which are located at the base; then extract the driveshaft after disconnecting it from the braking system. All that remains is to replace it and reassemble everything by applying the reverse procedure of disassembly!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Fog Light Bulbs on a Volkswagen Golf
Replacing the Front Fog Light Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below are the instructions that will allow you to remove and replace the bulbs of the front fog lights on a Volkswagen Golf. First, move to the side …
Replacing the Front Fog Light Bulb on the Volkswagen Golf 7
Replacing the Front Fog Light Bulb on the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you will see how to remove and replace the front fog light bulb on the seventh generation Volkswagen Golf in simple steps. First, turn…
How to Remove the Headrests from the Golf
How to Remove the Headrests from the Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Do you want to remove the front headrests from the Volkswagen Golf? Here’s how to do it simply. Open the door and enter the back of the car (rear pas…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos