|
Do it yourself
| |||
| ||||
Removing Front Wing on Volkswagen Passat B5
Model: Volkswagen Passat
3BG, B5
- Years:
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
Today, you will learn how to remove the front wing on a Volkswagen Passat B5 in simple steps. First, remove the screws located inside the wheel arch using a T20 Torx screwdriver; then, take off the first piece and gently detach the bumper from the sides to remove the wing bracket by unscrewing the fixing bolts. Next, open the bonnet and remove the additional upper bolts, and also disconnect the lens of the side indicator; finally, remove the front wing as shown in the video!
Updated on 4 May 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(2005-2010 /
B6, 3C)
In today's video, you will see the main instructions for removing the wheel arch and front wing of a Volkswagen Passat B6. First, remove all the scre…
Volkswagen Passat
(2010-2014 /
B7)
Following these simple steps, we will see how to disassemble and replace the daytime running light bulb of the front headlight of the Volkswagen Pass…
Volkswagen Passat
(2005-2010 /
B6, 3C)
Today we will explain how to replace the serpentine belt of the Volkswagen Passat model b6 on your own. To replace the belt, we need to lift the car …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |