Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seats of the Volkswagen Golf - Jetta - Bora

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Seat

Follow this brief and simple guide to remove the front seats of the Volkswagen Golf by following these quick steps. First, open the front and rear doors and start by unscrewing and removing the screws found on the front seat rails; to do this, first remove any plastic covers by moving the seat back and forth to access all the screws. At this point, disconnect the electrical connector located under the seat to remove it completely; for reassembly, simply apply the reverse procedure!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Ignition Barrel on the Volkswagen Golf 4 - Bora - Jetta
Removing the Ignition Barrel on the Volkswagen Golf 4 - Bora - Jetta
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. fourth-generation Volkswagen Golf, as well as the Jetta and Bora of the same generation. First, get inside the vehicle and insert the key into the barrel;.. …
Where to Find the Fuse Boxes of the Volkswagen Golf - Bora - Jetta
Where to Find the Fuse Boxes of the Volkswagen Golf - Bora - Jetta
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. external) of the Volkswagen Golf, as well as the Bora and Jetta. First, open the bonnet of the vehicle and begin to remove the plastic cover of the fuse.. …
Removing the Central Locking Module on the Volkswagen Golf - Bora MK4
Removing the Central Locking Module on the Volkswagen Golf - Bora MK4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. fourth series Volkswagen Golf, as well as on the Bora and Jetta. First, open the front door and start by removing the door panel; to do this, unscrew.. …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos