Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. New Beetle
    4. : How to reset the car stereo of the Volkswagen New Beetle?

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle 9C, MK 2 - Years 1999-2012
Part: Car stereo
Operation: How to reset the car stereo of the Volkswagen New Beetle?

In this tutorial we can see how to reset the car radio in the Volkswagen New Beetle, an operation to be carried out for example in case we want to return to the factory settings. Before doing this, however, we will have to get our unlock code, we can find it both on the information plate supplied with the purchase and at an official dealership. Once the code has been obtained, turn on the instrument panel and press the "SCAN" key and the right arrow key at the same time, this will bring the car radio to "Safe" mode. At this point we can enter the code using the keys ranging from number 1 to number 4.


Posted on 20 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • New Beetle 2011-2018 - How to obtain the radio code for the New Beetle? Read Answer
    • New Beetle 1999-2012 - Why does the radio of a Volkswagen New Beetle no longer work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos