Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil and Inspection Service on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Service warning light

To reset the service on the Volkswagen Tiguan, use the controls on the steering wheel and enter the settings menu on the display in the centre of the speedometer, scroll down until the message "service" appears and switch off the vehicle. To reset the service: press and hold the "set" button to the right of the speedometer and press the button to start the engine; the message "reset service oil" will appear on the central display of the speedometer and press the "ok" button on the steering wheel to confirm, then switch off the ignition. After resetting the oil service, turn on the ignition and note that the inspection needs to be reset. To reset the inspection: activate the hazard warning lights (four indicators), press the brake pedal, hold down the "set" button and press the button to start the engine; the message "reset inspection service" will appear on the central display of the speedometer and press the "ok" button on the steering wheel to confirm. After resetting the service and inspection, switch off the hazard warning lights and finally switch off the vehicle.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Briefly, here are the instructions to reset the inspection (service) warning on the Volkswagen Tiguan. First, get inside the vehicle and turn on the …
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In a few simple steps, you will see the procedure for resetting the inspection light (service) of the Volkswagen Tiguan. First, get inside the cabin …
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Below we will discover the instructions for resetting the maintenance service light on the Volkswagen Tiguan. First, we get into the car and start th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos