Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
Polo 4, MK 4, Polo IV, 9N, MK IV
- Years 2001-2009 In this video we show you how to reset the 2001 Polo 1.4 petrol engine. Keeping the electrical panel on but with the engine off, press and hold the button located under the odometer, exactly in the center. Keep it pressed for a few seconds, then start the engine while pressing the button. When you see that the service has cleared, release the button and stop the engine. Leave it off for a few seconds and then turn the electrical panel back on. At this point you will notice that the system has reset itself and therefore the operation has been successful.
Posted on 3 May 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |