Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Clock

To adjust the clock on the Volkswagen Jetta, turn the ignition key to power up the instrument cluster. Once the cluster is on, press the button located at the bottom left of the rev counter: this will make the hour flash, allowing you to change it by pressing the button at the bottom right of the speedometer. After selecting the hour, confirm it by pressing the left button again, and repeat the same procedure for the minutes. Once the hour is set, you can switch off and then back on the instrument cluster to verify the correct setting.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Volkswagen Jetta
How to set the clock on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) The instructions in this guide will show you how to adjust the clock on the display of the instrument cluster in the Volkswagen Jetta. First, get in …
How do you set the clock in the Volkswagen Jetta?
How do you set the clock in the Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) To adjust the clock of the Volkswagen Jetta, it will be necessary to turn on the instrument panel, so that it is then possible to use the button loca…
How do you set the clock in the Volkswagen Jetta?
How do you set the clock in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In order to set the clock of the Volkswagen Jetta, you need to turn on the instrument panel by inserting the ignition key into its slot: once the pan…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos