Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of the Volkswagen Polo 6R

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Seat

See other generations:
Video tutorial

In this new guide regarding the Volkswagen Polo 6R, you will learn how to correctly remove the rear seat. No tools are needed; just follow these instructions.

Before you start, ensure the car is completely off and parked on a flat surface. First, go to the back and pull upwards on the single seat that makes up the three available seats.

Locate the two safety hooks and remove them as well. At this point, you can completely remove the seat, and you're done.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Volkswagen Polo?
How to Replace the Fuel Pump on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the fuel pump on a Volkswagen Polo, first loosen the screws securing the rear seat bench to its housing. Once removed, you can locate the …
How to disassemble the gear knob of the Volkswagen Polo 6R
How to disassemble the gear knob of the Volkswagen Polo 6R
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To quickly and safely remove the gear knob inside the cabin of your Volkswagen Polo 6R, all you need to do is read the following guide and follow the…
Replacing the Fuel Pump on the Volkswagen Polo
Replacing the Fuel Pump on the Volkswagen Polo
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) In this video, see the steps to remove and replace the fuel pump on the Volkswagen Polo, following the instructions below. First, access the rear of …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos