Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : Volkswagen Polo fuel pump replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK III, Polo 3, MK 3, 6N, Polo III - Years 1994-2003
Part: Pump
Operation: Volkswagen Polo fuel pump replacement

Let's see in this video the steps on how to disassemble and replace the Volkswagen Polo fuel pump, following the instructions below. First of all, we access the rear part of the car and remove the sofa; then we are going to remove the pump cover, going to disconnect the fuel hoses and the electrical connector of the float sensor, as shown in the video. At this point we unscrew the ring nut of the pump, using the appropriate tool or beating with a flat screwdriver; we just have to remove and replace the pump with the new one!


Posted on 29 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the power steering pump located on Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos