Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Tiguan
    4. : How to remove the Volkswagen Tiguan front door trim panel?

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan MK 2, BW, AD - Years 2016-2024
Part: Door
Operation: How to remove the Volkswagen Tiguan front door trim panel?

If we wish to remove the car door panel, perhaps to replace the speakers, it is necessary to proceed as follows: first of all unhook the molding of the opening handle, levering with a pointed object, after which, under the molding there are screws that need to be removed. In the lower part of the panel there are 2 more screws that need to be removed. At this point, always with a pointed object, it is necessary to unhook all the clips, one by one, placed all around the panel itself. Once all the clips have been removed, proceed to lift the panel upwards to release it definitively.


Posted on 27 April 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Tiguan 2016-2025 - Why won't the tailgate of the VW Tiguan open? Read Answer
    • Tiguan 2016-2025 - What to do when the tailgate on Volkswagen Tiguan does not open? Read Answer
    • Tiguan 2016-2025 - Why won't the Volkswagen Tiguan 2 doors open? Read Answer
    • Tiguan 2016-2025 - Why is the fuel filler flap stuck in the 2016 Volkswagen Tiguan? Read Answer
    • Tiguan 2007-2016 - Why does the rear hatch of the Volkswagen Tiguan not lock? Read Answer
    • Tiguan 2007-2016 - Why does the Volkswagen Tiguan door not close? Read Answer
    • Tiguan 2016-2025 - Why does the tailgate of the Volkswagen Tiguan remain locked? Read Answer
    • Tiguan 2016-2025 - Why is the fuel flap of the Volkswagen Tiguan locked? Read Answer

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos