Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Disassembly of the grille and bumper on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Front bumper
Operation: Disassembly of the grille and bumper on Volkswagen Polo

Get a plastic wedge and remove the two side areas of the front bumper grille by prying it into the slot. This operation is clearly shown in the video. Once this is done, you can access the central part of the aforementioned grid and unhook it on all four sides. If, on the other hand, you want to remove the bumper itself, you have to unscrew the bolts and clips under the vehicle (lift it with a jack and stop it safely on the stands), above the bumper (near the engine compartment) and in the two wheel arches. Obviously proceed backwards for the various montages. Bye!


Posted on 14 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - What is the cost to replace the front bumper on the Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos