Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the taillight in a Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Tail light
Operation: How to remove the taillight in a Volkswagen Polo

In this tutorial we are explained how to proceed in order to remove the rear lights of a Volkswagen Polo. The operation is quite simple. First of all we will have to open the rear hood of the car and locate the small side door under the boot lining; therefore, once this flap is opened, we will have direct access to the light. As we can see from the images in the video, the headlight is locked to the car by means of a spring-shaped screw, which must be properly unscrewed in order to extract the headlight in question. At this point it will be sufficient to replace it with the new headlight by inserting it in its seat and tightening the screw.


Posted on 27 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos