Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Manufacturer's Badge from a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Manufacturer emblem

Let's briefly go through the steps to remove and replace the front manufacturer's badge on a Volkswagen Golf, GTI version. First, move to the front of your car and start by opening the bonnet, unscrewing the screws securing the front bumper grille (which can be found both at the top and inside it); then remove the manufacturer's badge from the inside by releasing the small tabs, as shown in the video. At this point, correctly install the new logo, following the video to the end!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Badges on a Volkswagen Golf
How to Replace the Badges on a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The steps outlined in this guide will show you the procedure for removing and replacing the manufacturer badges (both front and rear) on a Volkswagen…
Replacing the Manufacturer's Badge on the Volkswagen Golf
Replacing the Manufacturer's Badge on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the instructions to remove and replace the manufacturer's badge fixed on the tailgate of the Volkswagen Golf. First, move to the rear of th…
How to Remove the Badge from a VW Golf 6
How to Remove the Badge from a VW Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The steps to replace the manufacturer's badge on a Volkswagen Golf 6 are very simple to perform yourself. Follow these steps: First, insert an object…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos