Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Badges on a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Manufacturer emblem

The steps outlined in this guide will show you the procedure for removing and replacing the manufacturer badges (both front and rear) on a Volkswagen Golf. First, remove the front badge or logo by pulling it outward to detach it; take care not to damage the front bumper grille. To remove the rear badge, you will need to pry it off from the sides, trying not to damage the bodywork (mask if necessary on the sides); finally, fit the new manufacturer badge, following the video tutorial to the end!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To replace the badges on the Volkswagen Golf, follow the same procedure for both the front and rear. Use a tool to pry and release the clips located …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Let's briefly go through the steps to remove and replace the front manufacturer's badge on a Volkswagen Golf, GTI version. First, move to the front o…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In today's video, see how to replace the service battery in the fourth series of the Volkswagen Golf, specifically the 3-door model from the German m…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos