Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Light Switch on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

As shown in this tutorial, replacing the brake light switch on a Volkswagen Polo 9n is an extremely simple and quick operation. First, go under the dashboard on the driver's side, then remove the cover panel by unscrewing the relevant screws and locate the switch, which is positioned just above the brake pedal. At this point, rotate it approximately 45 degrees counterclockwise, pull it out of its housing, and disconnect the rear connector. To fit the replacement, simply follow the reverse procedure.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Replacing the air filter that feeds the engine of the Volkswagen Polo is one of the operations included in the maintenance service. To do this, open …
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The attached video shows the fuse diagram for a Volkswagen Polo. To access the fuses, open the front door. Next, unclip and remove the side cover of …
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) Before you can start, sit in the driver's seat of your Volkswagen Polo. Begin by inserting the extraction keys into the holes on the front of the CD …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos