Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Radiator from a Volkswagen Jetta - Golf

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Heater core

See other generations:
Video tutorial

In this guide, we will look at the main steps to remove and replace the cabin heater radiator of the Volkswagen Jetta, as well as the Golf. First, open the bonnet and start by disconnecting the radiator fluid hoses by loosening the clamp; let the fluid drain into a container.

Next, move inside the vehicle and remove the plastic cover found on the sides of the footwell to access the heat exchanger; then disconnect the internal hoses and unscrew the bracket screws to remove it, following the video until the end!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Radiator on a Volkswagen Jetta?
How to Replace the Heater Radiator on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the heater radiator on a Volkswagen Jetta, open the bonnet to access the rear of the engine bay. Here, you will find the fastening screws …
Removal of Front Door on Volkswagen Jetta - Golf
Removal of Front Door on Volkswagen Jetta - Golf
Volkswagen Jetta (2005-2010 / MK 5, A5) .. door of the Volkswagen Jetta, as well as the Golf. First, open the front door and start by disconnecting the cable protection found between the door.. …
How to Remove the Front Driveshaft of the Volkswagen Jetta - Golf
How to Remove the Front Driveshaft of the Volkswagen Jetta - Golf
Volkswagen Jetta (1998-2005 / A4, MK 4) .. of the Volkswagen Jetta, as well as the Golf. First, lift the vehicle and remove the front wheel. Next, detach the front arm, separating the.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos