Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Silent Block on Wishbone

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Control arm

See other generations:
Video tutorial

The failure of the silent blocks (rubber bushes) on the front suspension wishbones is a common issue. You can address this fault either by replacing the entire wishbone (which is available aftermarket at reasonable prices) or by opting for a repair that involves only the replacement of the bushes.

In this case, you will still need to remove the wishbone and have a threaded bar, washers, and appropriate diameter hole saws for removing the old bushes and inserting the new ones. Position the hole saws and the threaded bar to create a proper extractor: tightening the nut will push the smaller cup to extract the bush from its seat.

Use the same technique in reverse to insert the new bush.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Suspension Wishbone
Replacement of Front Suspension Wishbone
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The front suspension wishbone consists of two elements: the triangular-shaped wishbone itself, which has two silent blocks for attachment to the chas…
Replacement of Front Wishbone Bushes
Replacement of Front Wishbone Bushes
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) When the bushes (silent blocks) of the front suspension wishbone fail, the ride over uneven surfaces becomes particularly noisy, not to mention the l…
Replacement of Silentblock Bush for Wishbone
Replacement of Silentblock Bush for Wishbone
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If the rubber damper of the wishbone suspension has failed, it is often possible to purchase just the bush from the aftermarket rather than the entir…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos