Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads in a Volkswagen?

Model: Volkswagen Volkswagen Various
Part: Brake pads

In this tutorial, you will see how to replace the rear brake pads in a Volkswagen equipped with electronic parking brake. First, lift the side you will be working on, taking all necessary safety precautions, then remove the wheel and disconnect the indicated connector. Next, unscrew the two bolts of the caliper, separate it, and remove the old pads. Continue by removing the front bolts of the handbrake cylinder, fully rotate the motor shaft clockwise, and push the piston completely in using a clamp. Finally, insert the new pads and reassemble everything by following the reverse procedure.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Remote Control in a Volkswagen?
How to Program the Remote Control in a Volkswagen?
Volkswagen Volkswagen Various In this tutorial, see how to program the remote control in a Volkswagen, a very simple and quick operation to perform, for example, after replacing t…
How to Activate Volkswagen Connect?
How to Activate Volkswagen Connect?
Volkswagen Volkswagen Various To activate the Volkswagen Connect service, you need to download the appropriate application on your smartphone and once done, you will need to log i…
Where is the Fuse Box on a Volkswagen T5?
Where is the Fuse Box on a Volkswagen T5?
Volkswagen Volkswagen Various The video attached to this article shows the location of the fuses in your Volkswagen T5. The fuses are designed to prevent damage to the vehicle's e…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos