Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Replacing Spark Plug Cap

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

If you experience problems during engine starting and the idle speed is very irregular, there may be a detonation issue in one of the cylinders due to a faulty spark plug or coil; if the engine warning light also comes on, you can perform a diagnosis to check for fault codes: in this case, the third cylinder's misfire is indicated (cylinders are counted from the timing belt). Proceed to replace the complete cap with ignition coil by disconnecting the connector, removing the old cap, and inserting the new one to which you will connect the connector.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Here’s how to replace the ignition coil on a Volkswagen Polo IV. Disconnect the breather hose from the oil sump and lift the flexible hose from the e…
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) A glow plug is essentially a resistor that, when powered, becomes incandescent to pre-heat the combustion chamber and create optimal thermodynamic co…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this video, we see a basic functionality test to see if the coil generates a spark; very useful for identifying a faulty coil. In addition to the …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos