Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt on the Volkswagen Passat 2.0 TDI

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

See other generations:
Video tutorial

Today, we will go through the steps to remove and replace the timing belt on the Volkswagen Passat 2.0 TDI. First, open the bonnet and start removing the engine cover; then remove the pipes located on the left side by unscrewing the screws of the fuel filter to take it out, as shown in the video.

At this point, unscrew the screws of the engine mount; lift the vehicle to remove the wheel and disconnect the auxiliary belt by removing the crankshaft pulley.

Once the timing cover is removed, proceed to take the timing references!


Updated on 21 June 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) Let's see the directions that will show us the procedure for disassembling and replacing the timing belt of the Volkswagen Passat 2.0 TDI. First, we …
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) Today's main instructions will show us how to disassemble and replace the timing belt of the Volkswagen Passat 2.0 TDI. First, we open the hood of th…
How to Replace the Timing Belt on a Volkswagen Passat 1.9 TDI
How to Replace the Timing Belt on a Volkswagen Passat 1.9 TDI
Volkswagen Passat (2010-2014 / B7) In this video tutorial, you can see how to replace the timing belt on a Volkswagen Passat 1.9 TDI by following these steps: first, open the engine bo…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos